Panasonic KX-NCP1000 - Page 446

• Select the desired cell in the column, and then click Command.
Value Range
INS: The card is in service.
OUS: The card is out of service.
Fault: The card has been removed from the sub-slot, or is not communicating with the PBX.
Pre-Install: There is no card in the sub-slot, but the card type is programmed for the sub-slot.
Idle: There is no card in the sub-slot, no programming of the card type for the sub-slot.
Maintenance Console Location
3.58 [1-1] Slot—OPB3 Card Property
Programming Manual References
3.59 [1-1] Slot—OPB3 Card Property—Card Command
Feature Guide References
None
Port Number
Indicates the port number of the mounted option card (reference only).
Value Range
Port number
Maintenance Console Location
3.58 [1-1] Slot—OPB3 Card Property
Programming Manual References
None
Feature Guide References
None
Port Status
Indicates the port status of the mounted option card (reference only).
Value Range
INS: The card is in service.
OUS: The card is out of service.
Fault: The card is pulled out from the sub-slot, or is not communicating with the PBX.
Maintenance Console Location
3.58 [1-1] Slot—OPB3 Card Property
446 PC Programming Manual
3.58 [1-1] Slot—OPB3 Card Property