Panasonic KX-NCP1000 - Page 791

Each extension must be assigned to a specific card and block within the card, and can only use the assigned
card/block.
If two cards are used in the PBX, you should assign a number of extensions to each card, to ensure
that the necessary resources, such as message recording space, are available for each extension.
Value Range
None, Card1(A), Card1(B), Card2(A), Card2(B)
Maintenance Console Location
6.16 [4-2-5] Portable Station—Simplified Voice Message
Programming Manual References
3.1 [1-1] Slot
Feature Guide References
1.17.7 Built-in Simplified Voice Message (SVM)
Maximum of SVM Log
Specifies the maximum number of voice messages (not including greeting messages) that can be stored for
the extension.
Value Range
1–100
Maintenance Console Location
6.16 [4-2-5] Portable Station—Simplified Voice Message
Programming Manual References
None
Feature Guide References
1.17.7 Built-in Simplified Voice Message (SVM)
PC Programming Manual 791
6.16 [4-2-5] Portable Station—Simplified Voice Message