Panasonic KX-NS1000 - 2.7.2 Budget Management

Denied Code Tables
*1
Exception Code Tables
*2
Level 5 Tables for Levels 2 through 5 Tables for Levels 5 through 6
Level 6 Tables for Levels 2 through 6 Table for Level 6
Level 7 Not Programmable Not Programmable
*1
® 15.1 PBX Configuration—[7-1] TRS—Denied Code— Level 2–Level 6
*2
® 15.2 PBX Configuration—[7-2] TRS—Exception Code— Level 2–Level 6
[Usage Example] Using this method, certain outgoing trunk calls (e.g., international/cellular phone/long
distance) can be restricted as in the example below:
Restricted Allowed
Level 1
No restriction
Level 2
(Boss)
• International Calls • Countries where Clients are
Located
• Cellular Phone Calls
• Long Distance Calls
• Local Calls
Level 3
(Secretary)
• International Calls
• Cellular Phone Calls
• Boss’s Cellular Phone
• Long Distance Calls
• Local Calls
Level 4
(Operator)
• International Calls
• Cellular Phone Calls
• Long Distance Calls
• Local Calls
:
: :
In this example, a level 1 user can make any trunk calls. A level 2 user can make international calls to the
countries where
clients are located, and can also make cellular phone/long distance/local calls. A level 3 user
cannot make international/cellular phone calls apart from to the boss’s cellular phone, but can make long
distance/local calls. A level 4 user cannot make any international/cellular phone/long distance calls, but can
make local calls.
To set TRS/Barring as in the example above, it is necessary to programme the Denied Code and Exception
Code Tables as follows:
Denied Code Tables Exception Code Tables
Level 1 Not Programmable Not Programmable
Level 2 00
Leading number to deny
international calls
00xx
Leading number for countries
to be allowed
Level 3 090
Leading number to deny
cellular phone calls
090xxxxx
xxx
Boss’s
cellular phone number
Level 4
0
Leading number to deny long
distance calls
– Not required
: : :
[Programming Example: COS Settings]
Feature Guide 121
2.7.1 Toll Restriction (TRS)/Call Barring (Barring)