6.1 Capacity of System Resources
System
Item Capacity
Absent Message—Extension
1 ´ 16 characters
Absent Message—System
8 ´ 16 characters
Call Park Zone 100
Conference 3 – 8 parties per conference
72 parties total per KX-NS1000
PBX
32 parties total per legacy gateway
COS 512
DID/DDI Table 32 digits, 1000 entries
Extension number 1 – 5 digits
Extension
Personal Identification Number
(PIN)
10 digits, 1 entry/extension
Host PBX Access Code 10 digits, 10 entries/trunk group
Multiple Subscriber Number (MSN) 10 entries per ISDN-BRI port
Number of Characters of Name 20
Printing message 8
Queuing Time Table 128
Ring Tone Pattern Plan 8
Simultaneous Programmers
(PT Programming)
• one manager programmer + 63 personal programmers
• 64 personal programmers
Simultaneous Programmers
(Web Maintenance Console)
• one Installer level account
• 32 User (User) and User (Administrator) level accounts
SMDR Call Storage
1000 calls
Special Carrier Access Code 16 digits, 100 entries
Tenant 32/128
*1
Time Service Holiday 24
Verification Code 4 digits, 1000 entries
Verification Code Personal Identification
Number (PIN)
10 digits, 1000 entries
*1
The tenant capacity depends on the value selected for System Capacity Selection in Easy Setup. When System Resource
Type is selected in Easy Setup, the tenant capacity is set to 128. When any other item is selected, the tenant capacity is set to 32.
522 Feature Guide
6.1 Capacity of System Resources
To Next Page
Loading...
