2.22.1.2 Syslog Record Management
Description
By connecting this PBX to a Syslog server over a LAN, it is possible to output local alarm information (major
alarms/minor alarms) to an external PC.
Conditions
• To be able to use this feature, through system programming, it is required to enable this feature and register
the IP address of the Syslog server.
PC Programming Manual References
7.3.2 Utility—Log—Syslog
28.3.2 Network Service—[3-2] Client Feature—Syslog
Feature Guide References
5.6.4 Local Alarm Information
244 Feature Guide
2.22.1 Record Log Features
To Next Page
Loading...
