3.2.2.29 Remote Call Forwarding Set
Description
Allows subscribers and the Message Manager to program their extensions from a remote location in order to
forward calls to another extension or to an outside telephone.
There are 6 forwarding settings available:
• FWD All: Forwards all incoming calls to the desired extension number.
• FWD Busy: Forwards all incoming calls to the desired extension number when the line is busy.
• FWD No Answer: Forwards all incoming calls to the desired extension number when there is no answer.
• FWD Busy or No Answer: Forwards all incoming calls to the desired extension number when the line is
busy or there is no answer.
• FWD to CO: Forwards all incoming calls to Telephone number 1 or 2 (programmed in the Mailbox Setting),
or to any other number.
• FWD Cancel: Cancels the forwarding setting.
Conditions
• In order to use the FWD to CO option, the ability to forward calls to trunks must be enabled through system
programming.
• Extensions assigned as operators can be called by dialling [0], however, when setting this feature the
extension number (not "0") must be specified.
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
21.1 UM Configuration—[2] Class of Service
User Manual References
Subscriber Operation
1.8.5 Transferring Calls—
Remote Call Forwarding
Manager Operation
2.2.1 System Manager Features— Setting Class of Service (COS) Parameters
2.2.2 Message Manager Features
—
Remote Call Forwarding Set
3.2.2.30 Send to Fax Machine
Description
Through the voice mail guidance, a subscriber can send received faxes to another destination. This feature
can be used to send received faxes to a fax machine to print them out.
The subscriber can send faxes to the following destinations:
• A preprogrammed fax machine
• A fax machine specified by entering its number via the telephone
• The fax machine the subscriber is calling from (if calling from a fax machine)
The subscriber can select which faxes are sent, as follows:
• The current fax being "listened
" to
• All unprinted faxes
326 Feature Guide
3.2.2 Subscriber Features
To Next Page
Loading...
