Panasonic KX-NS1000 - Page 138

[Programming Example]
A telecom
6
0077
1, 2, 3
CH#12
2
Carrier Name
Removed Number of Digits
Carrier Access Code
Trunk Group
Modify Command
Carrier Table
7
CLIP Table No.
16
9
10
11
8
12
B telecom
0
0088
1, 2
CH
1
1
2
0123456789
0234567861
0356894526
:
0856325889
1
2
3
8
CLIP No.
Ext. 1001
CLIP
[Example]
Dialled number: 0123456789
(Trunk Access no. is ignored.)
Modification:
012345 6789 0077 6789 #12
Remove 6 digits.
9
CLIP: 0234567861
16
12
Add the Carrier Access
code ( ).
C
H
#12
Add the number.
10
Note
• If the
ARS Itemised Code is set to be sent as a CLIP with ARS, the following settings are prioritised
and used as the CLIP.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option
1—
ARS Itemised Code
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
—Option
1—
ARS Itemised Code
• CLIP Table No.1 is set automatically according to the following settings.
12.1.1
PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—CLIP—
CLIP ID
12.2.1 PBX Configuration—
[4-2-1] Extension—Portable Station—Extension Settings—CLIP—
CLIP ID
6. Optional Assignment
Authorisation Code for a Tenant
13
An Authorisation code can be assigned for each carrier and each tenant.
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Authorisation Code for Tenant
Authorisation Code for a Trunk Group
14
An Authorisation code can be assigned for each trunk group and each carrier.
® 16.7 PBX Configuration—[8-7] ARS—Authorisation Code for TRG
Itemised Billing Code
15
An Itemised Billing code can be assigned for each extension and for each verification code.
If a call is not made from an extension (e.g., DISA or TIE) and no verification code is used, the Itemised
Billing code assigned in the location 1 of the verification code will be used.
® 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
—Option 1—
ARS Itemised Code
138 Feature Guide
2.8.1 Automatic Route Selection (ARS)