Panasonic KX-NS1000 - Page 239

Number in
the Pattern
Item Description
(9) CD (Condition
Code)
Shows other call information with the following codes:
CL: Collect call
TR: Transfer
FW: FWD to trunk
D0: Call using DISA or TIE line service
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA:
Answered call with Call Waiting Caller ID (Visual Caller ID)
(10) Cost Shows the call charge.
[Programmable Items]
Item Description
Outgoing trunk call Controls whether the outgoing trunk calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR— Print Information—Outgoing
Call
Incoming trunk call Controls whether the incoming trunk calls are shown.
® 19.1 PBX Configuration—[11-1]
Maintenance
—Main—SMDR— Print Information—Incoming
Call
Outgoing intercom call Controls whether the outgoing intercom calls are recorded.
® 19.1 PBX Configuration—[11-1]
Maintenance
—Main—SMDR— Print Information—Intercom
Call
Log-in/Log-out status Controls whether the log-in/log-out status is recorded.
® 19.1 PBX Configuration—[11-1]
Maintenance
—Main—SMDR—
Print Information—Log-in /
Log-out
ARS dial Controls whether the user-dialled number
or the modified number
is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 2.8.1 Automatic Route
Selection (ARS))
® 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR
Options—
Option—ARS Dial
Feature Guide 239
2.22.1 Record Log Features