Panasonic KX-NS1000 - Page 341

® 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
Extension Number
• Network Type (BRI only)
Each BRI port can be set to the requirements of each country/area.
® 9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Network— Network
Type
• L1 Active Mode and L2 Data Link Mode (BRI only)
The active mode of Layer 1 (L1) and the data link mode of Layer 2
(L2) can be selected individually
(Permanent or Call by Call) on an ISDN port basis.
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Network
®
L1 Mode
®
L2 Mode
• TEI Assignment Mode (BRI only)
The Terminal Endpoint Identifier (TEI) assignment mode can be selected on an ISDN port basis
®
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Network—
TEI Mode
• Bearer Mode
The bearer mode can be assigned on an extension basis.
® 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
—Option 7—
ISDN Bearer
® 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
—Option 7—
ISDN Bearer
• Automatic ISDN Configuration
ISDN (BRI) port configuration can be set automatically through system programming.
® 6.2 Tool—BRI Automatic Configuration
The following items will be set by making and receiving a call using the subscriber number assigned for
each ISDN (BRI) port:
– L1 Active Mode
– L2 Data Link Mode
– Access Mode (Point-to-Point/Point-to-Multipoint)
– TEI Assignment Mode (Fix 00–63/Automatic)
PC Programming Manual References
6.2 Tool—BRI Automatic Configuration
9.26 PBX Configuration
—[1-1] Configuration—Slot—Card Property - BRI type/PRI type
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Extension
Inter-digit
10.9 PBX Configuration—[2-9] System—System Options—Option 2— ISDN en Bloc Dial—[#] as End of
Dial for en Bloc mode
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
→Main— Extension Number
→Option 7— ISDN Bearer
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
—Option 7—
ISDN
Bearer
11.1.4.1 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
—Auto Assign
Feature Guide References
4.3.4 QSIG Standard Features
Feature Guide 341
4.1.2 Integrated Services Digital Network (ISDN) Service Features