2. If the specified verification code applies COS 2 of PBX-2, the call is connected to the outside party
through PBX-2, because COS 2 is not blocked from accessing TRG 3 of PBX-2.
c. Override using an Itemised Billing Code for ARS
By assigning an Itemised Billing Code for ARS to PBX
-1, an extension’s verification code can be sent to
PBX-2 automatically, without the extension having to dial the verification code.
® 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—
ARS Itemised Code
® 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
—Option 1—
ARS Itemised Code
® 16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Guide 383
4.3.1 TIE Line Service
To Next Page
Loading...
