Panasonic KX-NS1000 - Page 446

a. Tenant 1 (COS
1 and COS 2) can make calls to both Tenant 2 (COS 3 and COS 4) and Tenant 3
(COS 5 and COS 6) as well as Tenant 1.
b. Tenant 2 (COS 3 and COS 4) can make calls to Tenant 1 (COS 1 and COS 2) and Tenant 2.
c. Tenant 3 (COS 5 and COS 6) can make calls to Tenant 3 itself only.
• An incoming call distribution group must belong to one tenant because the following features are
determined on a tenant basis (® 2.2.2.1 Incoming Call Distribution Group Features—SUMMARY):
– Music on Hold while a call is waiting in the queue
– The Time Table which determines the overflow destination
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
→
PBX Operator—Day, Lunch, Break, Night
→ BGM and Music on Hold—Music on Hold
10.4 PBX Configuration—[2-4] System—Week Table
10.5 PBX Configuration
—[2-5] System—Holiday Table
10.7.3 PBX Configuration—[2-7-3] System—Class of Service—Internal Call Block
11.2 PBX Configuration—[3-2] Group—User Group
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main—
Tenant Number
12.1.1
PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
User Group
12.2.1 PBX Configuration—
[4-2-1] Extension—Portable Station—Extension Settings—Main—
User Group
13.1 PBX Configuration—[5-1] Optional Device—Doorphone
—
Tenant Number
13.5 PBX Configuration—[5-5] Optional Device—External Sensor
—
Tenant No.
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
14.6 PBX Configuration
—[6-6] Feature—Tenant
Section 16 PBX Configuration—[8] ARS
16.5 PBX Configuration—[8-5] ARS—Carrier—Authorisation Code for Tenant
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—
Tenant Number
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table— Tenant Number
18.4 PBX Configuration—[10-4] CO & Incoming Call—MSN Table
—MSN—
Tenant Number
Feature Guide References
6.1 Capacity of System Resources
446 Feature Guide
5.1.3 Tenant Service