PC Programming Manual References
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property—GW Settings–Option 1— IP Codec
Priority—1st, 2nd, 3rd
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
→ DSP CODEC G.711 only (SIP extension)
→ DSP CODEC G.711 only (IP-GW)
→ DSP CODEC Priority-1 value only (others)
9.12 PBX Configuration—[1-1] Configuration
—Slot—V-IPGW16—Shelf Property
→
Voice Codec Priority 1st
→ Voice Codec Priority 2nd
→ Voice Codec Priority 3rd
9.11 PBX Configuration—[1-1] Configuration
—Slot—V-SIPGW—Port Property—Voice/FAX—
IP Codec
Priority—1st, 2nd, 3rd
9.15
PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property—Option—
IP Codec Priority
9.19
PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property—Option—
IP Codec Priority
9.34 PBX Configuration—[1-5] Configuration
—DSP Resource
Feature Guide References
2.14.2 Conference
2.28.2 Outgoing Message (OGM)
3.2 System and Subscriber Features
3.2.2.34 Two-way Record/Two-way Transfer
3.2.1.4 Automatic Two-way Recording for Manager
5.2.1 IP Proprietary Telephone (IP-PT)
5.2.2 SIP (Session Initiation Protocol) Extension
496 Feature Guide
5.5.4 DSP Resource Usage
To Next Page
Loading...
