Panasonic KX-NS1000 - Page 275

Parameters Steps
Message Retrieval Order
1.
1
to change the current setting (LIFO [Last In First Out] or FIFO
[First In First Out]).
2
to accept the current setting, then go to the next parameter.
2.
2
to accept.
Prompt Mode
1.
1
for Primary.
2
for System.
• For System, enter system prompt number (1–8).
2.
3
to accept.
Delete Message
Confirmation
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
Message Envelope
Playback Mode
1.
1
for Before.
2
for After.
3
for Require.
4
to accept the current setting, then go to the next parameter.
2.
4
to accept.
Caller ID Callback
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
Play System Prompt after
Personal Greeting
*1
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
Use Call Waiting on Busy
*1
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
Message Cancel for Live
Call Screening
*1
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
Intercom Paging Group
*1
1.
1
to change the paging group.
2
to accept the current setting, then go to the next parameter.
2. Enter the group number (1
–33).
3.
2
to accept.
Maximum Number of Caller
IDs for Caller Name
Announcement
*1
1.
1
to change the current setting.
2
to accept the current setting, then go to the next parameter.
2. Enter the number of announcements that can be programmed by
subscribers (1–30/0: None).
3.
2
to accept.
User Manual 275
2.2.1 System Manager Features