Panasonic KX-NS1000 - Page 274

Maintenance Console or by the System Manager using a telephone. COS No. 513 and No. 514 are assigned
by default to the Message Manager and the System Manager respectively.
• If the Unified Messaging system is being programmed via Web Maintenance Console, the
System Manager cannot set COS parameters. The system will announce,
"Sorry, this
function is not available".
To set COS parameters
Follow the steps detailed below to set the following Class of Service parameters:
Log in to the System
Manager’s mailbox.
Enter 52.
25
class of
service no.
Enter the class of
service number (1–64).
Follow system prompts
and set each
parameter below.
Parameters Steps
Personal Greeting Length
*1
1.
1
to change the greeting length.
2
to accept the current setting, then go to the next parameter.
2. Enter the greeting length (1
–360 s).
3.
2
to accept.
New Message Retention
Time
1.
1
to change the retention time.
2
to accept the current setting, then go to the next parameter.
2. Enter the retention time (a maximum of 30 days or 0: Unlimited).
3.
2
to accept.
Saved Message Retention
Time
1.
1
to change the retention time.
2
to accept the current setting, then go to the next parameter.
2. Enter the retention time (a maximum of 30 days or 0: Unlimited).
3.
2
to accept.
Message Length
1.
1
to change the message length.
2
to accept the current setting, then go to the next parameter.
2. Enter the message length (1–
60 min or 0: Unlimited).
3.
2
to accept.
Total Message Time
Available per Mailbox
1.
1
to change the total message time.
2
to accept the current setting, then go to the next parameter.
2. Enter the total message time (1–600 min or 0: Unlimited).
3.
2
to accept.
274 User Manual
2.2.1 System Manager Features