Panasonic KX-NS1000 - 3.2 System and Subscriber Features; 3.2.1 System Features

Parameters Steps
Auto Forwarding
1.
1
to change the current setting (enable or disable).
• If set to "Disable":
The
Auto Forwarding parameter is the last parameter to be entered.
To continue assigning or editing other mailboxes, go back to STEP
B.
To finish, enter
.
2.
2
to accept.
Forwarding Mailbox
Number
1.
1
to change the current setting.
2. Enter the forwarding mailbox number.
3.
2
to accept.
Forwarding Delay Time
1.
1
to change the current setting.
2. Enter the delay time, and
#
.
3.
2
to accept.
Forwarding Mode
1.
1
to change the current setting (Copy or Move).
2.
2
to accept, then go to "Auto Forwarding".
To delete a mailbox
The
System Manager should delete mailboxes that are no longer needed. When another person accesses the
Unified Messaging system, the action is automatically cancelled.
1. Log in to the System Manager’s mailbox.
2.
5
1
2
3. Enter the mailbox number.
4.
1
to delete the mailbox.
To reset a mailbox password
When a password is forgotten, the System Manager must reset the password before it can be reassigned by
the subscriber.
1. Log in to the System Manager’s mailbox.
2.
5
1
3
3. Enter the mailbox number.
4.
1
to delete the password.
• The System Manager password cannot be reset here. The System Administrator can reset
the System Manager password using Web Maintenance Console.
• After the password is reset, if the System Administrator has set "Default Password for New
Mailboxes" to
"Enable", the password will be set to the default password. If set to "Disable",
the mailbox will have no password.
Setting Class of Service (COS) Parameters
A Class of Service (COS) defines the set of system services available to the mailboxes assigned to it. There
are 514 Classes of Service; they can be assigned to mailboxes by the System Administrator using Web
User Manual 273
2.2.1 System Manager Features