Personal Custom Service
Item Description
Personal Custom Service Specifies the Personal Custom Service.
Note
• Make
sure to add an outside line access number when you store an
outside telephone number.
• If you are using a PRI line, you may need to enter # at the end of
outside telephone numbers.
Follow the steps below to edit a Personal Custom Service.
1. Click Edit.
2. For each Key, specify an Assigned Operation.
3. For each Assigned Operation that is specified, specify a Value from
the following.
• Transfer to specified mailbox: Allow the caller to leave messages
in a specified mailbox.
• Transfer to specified extension: Transfers the caller to a specified
extension.
• Transfer to Voice Mail Service: Allows the caller to access Voice
Mail Service.
• Transfer to Automated Attendant Service: Allows the caller to
access Automated Attendant Service.
• Transfer to specified Custom Service Menu: Transfers the caller
to the Custom Service specified here.
• Transfer to operator: Connects the caller to an operator.
• Transfer to outside (specified number): Transfers the caller to a
specified outside telephone number. Enter the outside numbers list
index (1–4).
• Page the party: Pages you.
• Repeat greeting: Repeats the greeting.
• None: No operation assigned.
4. Click OK when finished.
Outside Numbers Specifies the outside telephone numbers that can be used for the "Transfer
to outside (specified number)
" operation in the Personal Custom Service
settings.
1. Click Edit.
2. Enter Outside Number #1–#4: Max. 32 digits consisting of 0–9,
, #, and
special codes:
• T: Dial Tone Detection
• ,: Dial Pause (default 1 s)
• ;: Dial Pause (default 3 s)
• 0–9, , #: Dial Code
3. Click OK when finished.
330 User Manual
3.2.1 User Programming
To Next Page
Loading...
