Item Description
No DTMF Input Operation Specifies the operation taken when no DTMF input (a caller does not dial
anything) is received after the Personal Greeting:
• Recording: The caller will be guided to leave a message.
• Disconnect (All Day): The line will be disconnected, regardless of the
time of day.
• Disconnect (Only
After Hours): The line will be disconnected only after
hours.
No DTMF Input Operation
Wait Time
Specifies the duration of time to wait for DTMF input before the action set in
No DTMF Input Operation is performed (0–10 s).
Personal Distribution List
Item Description
List 1–4 Members Personal Distribution Lists are used to send the same messages to several
mailboxes
in a single operation. A maximum of 4 lists can be maintained with
each list containing a maximum of 40 mailboxes.
Specifies the mailbox numbers that belong to the list.
Follow the steps below to edit list members.
1. Click Edit for a Personal Distribution List (1–4) Members item.
2. Under Subscribers To Add, click the checkbox in No. for each mailbox
to add, referring to the mailbox numbers and mailbox owners’ names.
3. Click Add.
4. Click OK.
Follow the steps below to remove members from a list.
1. Click Edit for Personal Distribution Lists (1–4) Members item.
2. Under Distribution, click the checkbox in No. for each mailbox to add,
referring to the mailbox numbers and mailbox owners’ names.
3. Click Delete.
4. Click OK.
Remote Call
Item Description
Remote Call Telephone
Number 1, 2 [0–9, *]
Specifies the telephone numbers of destinations to which callers are
forwarded
when you set Remote Call Forwarding. 2 telephone numbers can
be specified per mailbox.
Make sure you begin the telephone number with an outside line access
number (to seize an outside line).
Note
This
feature may be disabled by system programming for your mailbox.
User Manual 331
3.2.1 User Programming
To Next Page
Loading...
