Panasonic KX-NS1000 - Page 106

Input
Display while
Entering
Description
PAUSE (Pause) P Store a pause by pressing the PAUSE
button. (® 2.5.4.7 Pause Insertion)
FLASH/RECALL
(Hooking)
*1
F Store a flash/recall signal (EFA mode) by
pressing the FLASH/RECALL button at
the beginning of the number.
(® 2.11.7 External Feature Access
(EFA))
INTERCOM (Secret)
*1
[ ] Conceal all or part of the number by
pressing the INTERCOM button at the
beginning and at the end of the number
to be concealed. It is programmable
whether the concealed part will appear
on SMDR.
TRANSFER (Transfer)
*1
T Store a transfer command by pressing
the TRANSFER button at the beginning
of the number (used only for a One-touch
Dialling). (® 2.12.1 Call Transfer)
[Example] Storing "T + 305"=
Transferring a call to extension 305.
*1
Available only when in system/personal programming mode
[Secret Dialling Example]
When storing the number "9-123-456-7890" and concealing the telephone number "123-456-7890",
Enter .INTERCOM9 1 2 3 4 5 6 7 8 9 0 INTERCOM
Note
• It is possible to store a Memory Dialling feature number at the beginning of the Memory Dialling
numbers.
• It is possible to store several feature numbers in one Memory Dialling location.
Conditions
• Trunk Access by Memory Dialling
A specific Trunk Access number can be stored with the telephone number in Memory Dialling. However,
if Memory Dialling is done after selecting a trunk, the stored Trunk Access number is ignored and the
telephone number is sent using the selected trunk.
106 Feature Guide
2.6.1 Memory Dialling Features—SUMMARY