5.5.2 PC Programming
Description
There are three levels of authorisation for programming the PBX, where each level controls which settings the
programming is allowed to access and change. The three levels are as follows:
Level Description Number of Accounts/Network
Installer For dealers and system installers 1
User
(Administrator)
For on-site managers 32
User (User) For end users Up to 1512
*1
*1
The total number of administrator and user accounts combined cannot exceed 1512.
Conditions
• Each account is assigned a password that is required to log in.
• Users can be added using the Add User Wizard.
CAUTION
To the Administrator or Installer regarding account passwords
1. Please provide all system passwords to the customer.
2. To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known to
others.
3. The PBX has no passwords set initially. For security, select an installer password as soon as the PBX
system is installed at the site.
4. Change the passwords periodically.
5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access.
Installation Manual References
5.3 Starting Web Maintenance Console
PC Programming Manual References
2.1.1 Web Maintenance Console Accounts
2.1.2 Access Levels
8.2 Users—Add User
User Manual References
3.2 System Programming Using Web Maintenance Console
474 Feature Guide
5.5.2 PC Programming
To Next Page
Loading...
