Panasonic KX-NS1000 - 2.2.2.8 Supervisory Feature

2.2.2.8 Supervisory Feature
Description
An extension preprogrammed as a supervisor (supervisor extension) can monitor and control each member’s
status within the incoming call distribution group using a 6-line display PT.
Feature Description
Incoming Call Queue Monitor The supervisor extension can monitor the status of an incoming
call distribution group with the display.
Log-in/Log-out Monitor and
Remote Control
Monitor: The supervisor extension can monitor the log-in/log-out
status of the incoming call distribution group members through the
corresponding DSS button light.
Remote Control: The supervisor extension can change the
status of the members by pressing the corresponding DSS button.
[Example]
--- Date and time
--- ICD group’s floating extension number and name
--- Number of calls waiting in the queue
--- Elapsed waiting time of the call queuing the longest
With
<Incoming Call Queue Monitor Display>
<Log-in/Log-out Monitor/Remote Control Mode with DSS Button light>
JAN.31 08:13AM FRI
601:Sales Section
Waiting Calls Now :00006
Max. Waiting Time :05'10
EXIT LOG SPRVS
Log-in/Log-out Monitor
DSS buttons show the status
of the corresponding group
members.
Log-in/Log-out Remote Control
Pressing a DSS button
changes the extension’s
status as follows:
Light pattern
Green on
Slow Green Flashing
Red on
Off
Status
Log-in (Ready)
Log-in (Not Ready)
Log-out
Light pattern
Red on
Green on
Status
Log-out
Log-in (Ready)
Since JAN.29 09:10AM
Total Calls :00996
Overflow Calls :00131
Lost Calls :00039
Average Waiting :02'12
EXIT CLEAR
JAN.31 08:13AM FRI
601:Sales Section
Waiting Calls Now :00006
Max. Waiting Time :05'10
EXIT
--- Monitoring starting date and time
--- Total number of incoming calls
--- Total number of overflowed calls
--- Total number of lost calls
--- Average queuing time
Extension in another ICD
group
Conditions
• Available Extension as a Supervisor Extension
68 Feature Guide
2.2.2 Incoming Call Distribution Group Features