2.22.1.2 Syslog Record Management
Description
By connecting this PBX to a Syslog server over a LAN, it is possible to output local alarm information (major
alarms/minor alarms) to a external PC.
Conditions
• To be able to use this feature, through system programming, it is required to enable this feature, register
the IP address of the Syslog server, and to select whether major/minor are sent.
PC Programming Manual References
7.3.2 Utility—Log—Syslog
27.3.2 Network Service—[3-2] Client Feature—Syslog
Feature Guide References
5.6.4 Local Alarm Information
230 Feature Guide
2.22.1 Record Log Features
To Next Page
Loading...
