Panasonic KX-NS1000 - Page 423

® 11.4.2 PBX Configuration—[3-4] Group—Paging Group—External Pager
[Example]
Extension
User Group 1
Paging Group 1
Extn. 100 Extn. 101
Extension
User Group 2
Extn. 102 Extn. 103
Extension
User Group 3
Extn. 104 Extn. 105 Pager
Paging Group 2 Paging Group 3
3. Idle Extension Hunting Group
If a called extension is busy or in DND mode, Idle Extension Hunting redirects the incoming call to an idle
member of the same idle extension hunting group, which can be programmed through system
programming. Idle extensions are automatically searched according to a preprogrammed hunting type:
Circular Hunting or Terminated Hunting (® 2.2.1 Idle Extension Hunting).
® 11.6 PBX Configuration—[3-6] Group—Extension Hunting Group
® 11.6.1 PBX Configuration—[3-6] Group—Extension Hunting Group—Member List
4. Incoming Call Distribution Group
An incoming call distribution group is a group of extensions which receives incoming calls directed to the
group. Each incoming call distribution group has a floating extension number (default: 6 + two-digit group
number
*1
) and name. One extension can belong to multiple groups.
® 11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
® 11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group
Settings—Member List
Assignable Extensions: PT/SLT/PS/SIP Extension/ISDN Extension/T1-OPX/PS Ring Group
(® 2.2.2 Incoming Call Distribution Group Features)
[Example]
Incoming Call
Distribution Group 1
(Floating Extn. No. 601,
Name: Sales 1)
Incoming Call
Distribution Group 2
(Floating Extn. No. 602,
Name: Sales 2)
Extn. 100 Extn. 101
Extn. 102
Extn. 105 Extn. 106
Extn. 103 Extn. 104
Extn. 107
*1
The number of digits for Floating Extn. No depends on the value specified for Numbering Plan in Easy Setup.
® 2.1.4 Easy Setup Wizard—PBX Setting—Select the default value of Numbering Plan
5. UM Group
A UM group is the collection of all Unified Messaging ports of one PBX. One UM group exists for each PBX
in a One-look network. Each UM group is assigned a floating extension number.
(® 3.1.1 Unified Messaging System Overview)
® 11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings
® 11.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit Settings
6. VM Group
There are two types of VM groups as follows:
Feature Guide 423
5.1.2 Group