• Calls made using a Bluetooth wireless headset will not be disconnected immediately when the user
wanders out of range. However, if the Bluetooth wireless headset user remains out of range for a specified
time period, the call will be disconnected.
• The following features, available when a legacy gateway is connected (® 5.3.1 Stacking Connection),
cannot be used with an IP-PT:
– XDP
– Digital XDP
– OHCA
• Automatic Rerouting to Secondary PBX
A KX-NT300 series or KX-NT500 series IP-PT can automatically connect to a secondary PBX, when the
primary PBX becomes disconnected. When the primary PBX is connected again, the IP-PT reconnects to
it. (® 4.2.3.2 Automatic Rerouting to Secondary PBX)
Installation Manual References
4.4 Virtual Cards
PC Programming Manual References
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main—Main—
IP Terminal Registration
Mode
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Card Property
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide 439
5.2.1 IP Proprietary Telephone (IP-PT)
To Next Page
Loading...
