[Personal/System Speed Dialling Name Display]
• When a trunk call is made from the Outgoing Call Log, if a name is registered to the Personal/System
Speed Dialling entry, the name is displayed on the second line of a display PT
’s LCD. The name is not
displayed on a phone with a one line LCD.
• If a name is registered to the Personal/System Speed Dialling entry, when another call is made using the
REDIAL button after a trunk call is made using Personal/System Speed Dialling, the name is displayed on
the second line of a display PT’s LCD.
• When a trunk call is made from the Outgoing Call Log, if a name is not registered to the Personal/System
Speed Dialling entry, the dialled number is displayed on a display PT’s LCD.
• If the number registered in the Personal/System Speed Dialling is changed after the number is recorded
in the Outgoing Call Log, the Personal/System Speed Dialling entry name will not be displayed. Instead,
the name registered in the Outgoing Call Log will be displayed.
• If the name registered in the Personal/System Speed Dialling is changed after the name is recorded in the
Outgoing Call Log, the changed name will be displayed on a display PT’s LCD.
• If the mode to save digits dialled after connection is enabled, all digits (including the automatically entered
"P" for pause) dialled up until the end of the call must be registered in the Personal/System Speed Dialling
entry to enable this feature.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone
→
Automatic Redial—Repeat Counter
→ Automatic Redial—Repeat Interval (x10s)
→ Automatic Redial—Redial Call Ring Duration (x10s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main—Features—
Redial
10.9 PBX Configuration
—[2-9] System—System Options—Option 2
→
Redial—Automatic Redial when No Answer (ISDN)
→ Redial—Save Dial After Connection to Redial Memory
→ Redial—Call Log by Redial key
10.9 PBX Configuration
—[2-9] System—System Options—Option 7—
Outgoing Call Log—Extension Call
12.1.1
PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 7—
Outgoing
Call Log Memory
12.2.1
PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 7—
Outgoing
Call Log Memory
PT Programming Manual References
[205] Automatic Redial Repeat Times
[206] Automatic Redial Interval
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
6.1 Capacity of System Resources
User Manual References
1.2.3 Redial
1.14.1 Using the Call Log
Feature Guide 123
2.6.3 Last Number Redial
To Next Page
Loading...
