Panasonic KX-NS500 - Autoplay New Message

Notice
When disabling the password requirement, ensure that an unauthorised third
-party is not allowed access
to your extension.
Conditions
• Access from outside telephones will be enabled automatically after a Caller ID number, DID number, or
trunk group number is assigned. A trunk group number or DID number can be assigned by the System
Administrator only.
• When this feature is activated, "Toll Saver" is also available.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
→
Auto Login Extension
→ Auto Login Extension Password Entry Requirement
→ Auto Login Caller ID 1, 2
→ Auto Login Caller ID Password Entry Requirement
→ Auto Login DDI/DID
→ Auto Login TRG No.
→ Auto Login DDI/DID, TRG No. Password Entry Requirement
→ Auto Login Toll Saver
Feature Guide References
3.2.2.29 Toll Saver
User Manual References
Subscriber Operation
1.8.6
Other Features—
Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver
3.2.2.3 Autoplay New Message
Description
It is possible to play new messages automatically when a subscriber or the System Manager/Message
Manager logs into his or her mailbox. There is no need to press [1] to receive the new messages.
Conditions
• If
there is more than one new message in the mailbox, it can be set whether or not messages will be played
continuously without system prompts.
® 21.1 UM Configuration—[2] Class of Service—Mailbox—
Play New Messages Sequentially
PC Programming Manual References
21.1 UM Configuration
—[2] Class of Service—Mailbox—
Autoplay New Message
Feature Guide 355
3.2.2 Subscriber Features