Destination Availability
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
ü
Other PBX Extension (TIE with PBX Code)
6. Intercept Routing
After setting distribution, it may also be necessary to set the following features.
Feature Description & Reference
Intercept Routing No Answer (IRNA) If a called party does not answer a call within a
preprogrammed time period
(Intercept time), it is
redirected to the preprogrammed destination.
® 2.1.1.6 Intercept Routing
Busy/DND If a called party is busy or in DND mode, the call is
redirected to the preprogrammed destination.
® 2.1.1.6 Intercept Routing
No Destination If a destination is not assigned, the call is redirected to
the operator.
® 2.1.1.7 Intercept Routing—No Destination
PC Programming Manual References
18.2 PBX Configuration
—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—
Trunk Property
22 Feature Guide
2.1.1 Incoming Trunk Call Features
To Next Page
Loading...
