Panasonic KX-NS500 - Page 471

® 11.8.1 PBX Configuration—[3-8] Group—PS Ring Group—Member List
PS Ring Group 1
(Floating Extn. No. 301,
Name: Sales 1)
PS Ring Group 2
(Floating Extn. No. 302,
Name: Sales 2)
PS01
PS02
PS03
PS04
PS05
PS06
8. Conference Group
A conference group is a group of parties that are called when an extension user uses the Conference
Group Call feature (® 2.15.1 Conference Group Call). When Broadcast Mode is enabled through system
programming, a maximum of 31 parties can be assigned to a group. When Broadcast Mode is disabled, a
maximum of 7 parties can be assigned to a group. A maximum of 8 conference groups can be programmed.
→ 11.9 PBX Configuration—[3-9] Group—Conference Group
→ 11.9.1 PBX Configuration—[3-9] Group—Conference Group—Member List
9. P2P Group
Devices in the same P2P group can establish peer-to-peer (P2P) connections and communicate (make
calls) without using PBX resources. IP-PTs, SIP extensions, SIP Trunks, and PBXs are all assigned to
P2P groups.
Connection between devices in the same P2P group
P2P
P2P Group 1
PBX
DSP
Feature Guide 471
5.1.2 Group