• The LCD corresponds with the call waiting tones 1, 2, and 3 as follows.
Tone 1
Tone 2
Tone 3
Monitor cycle (15 s)
Monitor display time
(Default: 5 s)
PC Programming Manual References
10.3 PBX Configuration
—[2-3] System—Timers & Counters—Miscellaneous—
Call Pickup Group
Monitor—LCD Display Duration
(s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→
Group Call Pickup
→ Directed Call Pickup
→ Call Pickup Deny Set / Cancel
10.7.1 PBX Configuration
—[2-7-1] System—Class of Service—COS Settings—Assistant—
Call Pickup by
DSS
10.9 PBX Configuration
—[2-9] System—System Options—Option 4
→
DSS Key—DSS key mode for Incoming Call
→ DSS Key—Call Pick-up by DSS key for Direct Incoming Call
→ DSS Key—Call Pick-up by DSS key for ICD Group Call
→ DSS Key—Caller Information Display before Call Pick-up
11.3 PBX Configuration
—[3-3] Group—Call Pickup Group
11.3.1 PBX Configuration—[3-3] Group—Call Pickup Group—All Setting—
Main—Call
Pickup Group Monitor
Feature
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 3
→
Call Pickup Deny
→ Call Pickup Group Monitoring
12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Option 3—
Call
Pickup Deny
Feature Guide References
5.1.1 Class of Service (COS)
6.1 Capacity of System Resources
PT Programming Manual References
[650] Extension User Groups of a Pickup Group
96 Feature Guide
2.4.3 Call Pickup
To Next Page
Loading...
