Panasonic KX-TDA600

1.6 F
104 Feature Manual
External Feature Access (EFA) Used to send a flash/recall signal to the telephone company or host
PBX to access external features.
(→ 1.5.1 EFA (External Feature Access))
Call Park Used to park or retrieve a call in a preset PBX parking zone.
(→ 1.3.5 Call Park)
Call Park (Automatic Park
Zone)
Used to park a call in an idle PBX parking zone automatically.
(→ 1.3.5 Call Park)
Call Log Used to show a log of received calls. (→ 1.3.3 Call Log, Incoming)
Log-in/Log-out* Used to switch between Log-in and Log-out status.
(→ 1.9.3 ICD Group Features—Log-in/Log-out)
Hurry-up Used to redirect the longest waiting call in the queue of an ICD group to
the overflow destination. (→ 1.9.6 ICD Group Features—Queuing)
Wrap-up* Used to switch between Wrap-up/Not Ready and Ready modes.
(→ 1.9.3 ICD Group Features—Log-in/Log-out)
System Alarm Used to display a PBX error. (→ 1.10.4 Local Alarm Information)
Time Service* Used to change or display the current time mode (day/lunch/break/
night). (→ 1.17.5 Time Service)
Answer Used to answer an incoming call. (→ 1.8.3 Headset Operation)
Release Used to disconnect the line during or after a conversation, or to
complete a Call Transfer. (→ 1.8.3 Headset Operation)
Toll Restriction Used to change the Toll Restriction (TRS) level of other extension users
temporarily. (→ 1.4.4 Dial Tone Transfer)
Calling Line Identification
Restriction (CLIR)*
Used to switch between CLIP and CLIR service.
(→ 1.3.13 CLIP (Calling Line Identification Presentation), → 1.13.21
Private Network Features—QSIG—CLIP/COLP (Calling/Connected
Line Identification Presentation) and CNIP/CONP (Calling/Connected
Name Identification Presentation))
Connected Line Identification
Restriction (COLR)
Used to switch between COLP and COLR services.
(→ 1.13.21 Private Network Features—QSIG—CLIP/COLP (Calling/
Connected Line Identification Presentation) and CNIP/CONP (Calling/
Connected Name Identification Presentation))
Headset Used to turn headset mode on/off while idle.
Used to switch between hands-free mode and headset modes during a
conversation. (→ 1.8.3 Headset Operation)
Time Service Switching Mode
(Automatic/Manual)*
Used to switch between Automatic Switching and Manual Switching
mode. (→ 1.17.5 Time Service)
Two-way Record Used to record a conversation into your own mailbox.
(→ 1.19.4 Voice Mail DPT (Digital) Integration)
Two-way Transfer Used to record a conversation into the mailbox of a specified extension.
(→ 1.19.4 Voice Mail DPT (Digital) Integration)
One-touch Two-way Transfer Used to record a conversation into the mailbox of a specified extension
with a one-touch operation.
(→ 1.19.4 Voice Mail DPT (Digital) Integration)
Button Usage