Panasonic KX-TDA600

1.9 I
Feature Manual 141
Programming References
PC Programming Manual
2.9.8 [2-6-1] Numbering Plan—Main—Features
→ Log-in / Log-out
→ Not Ready (Manual Wrap-up) Mode On / Off
2.10.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous
→ No. of Unanswered Calls for Automatic Log-out
→ Last Extension Log-out
2.10.15 [3-5-3] Incoming Call Distribution Group—Miscellaneous—Options—Wrap-up Timer based on
2.10.13 [3-5-1] Incoming Call Distribution Group—Member List—Wrap-up Timer
2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 8—Wrap-up Timer
2.11.5 [4-1-4] Wired Extension—Flexible Button
→ Ty p e
→ Parameter Selection (for Log-in/Log-out)
→ Ext. No. / Floating Ext. No. (for Log-in/Log-out)
2.11.10 [4-2-1] Portable Station—Extension Settings—Option 8—Wrap-up Timer
2.11.13 [4-2-3] Portable Station—Flexible Button
→ Ty p e
→ Parameter Selection (for Log-in/Log-out)
→ Ext. No. / Floating Ext. No. (for Log-in/Log-out)
2.11.17 [4-3] DSS Console
→ Ty p e
→ Parameter Selection (for Log-in/Log-out)
→ Ext. No. / Floating Ext. No. (for Log-in/Log-out)
2.18.1 [11-1] Main—SMDR—Print Information—Log-in / Log-out
PT Programming Manual
None
Feature Manual References
1.6.3 Flexible Buttons
Operating Manual References
1.3.38 ICD Group Features—Log-in/Log-out
1.9.4 ICD Group Features—Outside Destinations
Description
Up to 4 outside parties or destinations at another PBX can be assigned as members of an Incoming Call
Distribution (ICD) Group, using the following method: A virtual PS is registered as a member of the ICD
Group. Then, the telephone number of the outside destination is specified as the FWD—All Calls
destination. Calls to the ICD Group will also ring at the outside destination as if that destination were an
extension within the PBX.
This is useful in situations such as the following: