1.1 A
Feature Manual 23
Callback ringing will be sent to extensions in the order that the feature was set. In other words, the
extension that set the feature first will receive a callback ringing first.
• This feature cannot be used for calls to a Voice Processing System (VPS).
Programming References
PC Programming Manual
2.9.8 [2-6-1] Numbering Plan—Main—Features—Automatic Callback Busy Cancel
2.9.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Automatic Callback Busy
PT Programming Manual
None
Operating Manual References
1.3.4 Automatic Callback Busy (Camp-on)
1.1.5 Automatic Extension Release
Description
After going off-hook, if an extension user fails to dial any digits within a preprogrammed time period, the user
will hear a reorder tone. This operation applies to intercom calls only.
This feature is also known as Automatic Station Release.
Conditions
• A proprietary telephone (PT)/portable station (PS) user hears a reorder tone for a preprogrammed time
period, and then the PT/PS returns to idle status automatically. A single line telephone (SLT) user will
hear a reorder tone until he or she goes on-hook.
• This feature works in one of the following cases:
When making an intercom call
a) The first digit is not dialed within a preprogrammed time period.
b) A digit is dialed, but subsequent digits are not dialed within a preprogrammed time period.
Programming References
PC Programming Manual
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→ Dial—Extension First Digit
→ Dial—Extension Inter-digit
→ Tone Length—Reorder Tone for PT Handset
→ Tone Length—Reorder Tone for PT Hands-free
PT Programming Manual
None
To Next Page
Loading...
