Panasonic KX-TDA600

1.18 U
314 Feature Manual
1.18 U
1.18.1 Upgrading the Software
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Conditions
• The software version of the EMPR or MPR card can be confirmed through system programming.
Installation Manual References
KX-TDA100/KX-TDA200
2.3.1 MPR Card
KX-TDA600
2.3.1 EMPR Card
Programming References
PC Programming Manual
2.8.3 [1-1] Slot—Card Property - MPR—Memory Version:
PT Programming Manual
[190] Main Processing (MPR) Software Version Reference
Data File Storing Area
Main Processing (EMPR/MPR) software
data
Operating system data area on either the EMPR card of the
KX-TDA600, the MPR card of the KX-TDA100/KX-TDA200,
or the Main Board of the KX-TDA50.
Default system programming data for each
country/area
Country/area data area on the EMPR card, MPR card, or
Main Board
Language data for PT display Each language data area on the EMPR card, MPR card, or
Main Board.
There are two types:
Type 1: Proprietary Telephone (PT) display except for PT
system programming (→ 1.13.28 PT Programming) (five
languages max.)
Type 2: PT system programming data (one language max.)
LPR (software on a slot card) software data
(KX-TDA100/KX-TDA200/KX-TDA600 only)
Flash ROM on the appropriate optional services card (e.g.,
DHLC, DLC, T1, PRI, etc.)
Cell Station (CS) software data Flash ROM on the CS