Panasonic KX-TDA600

1.15 R
270 Feature Manual
Programming References
PC Programming Manual
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→ Automatic Redial—Repeat Counter (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ Automatic Redial—Redial Call Ring Duration (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ Automatic Redial—Analog CO Mute / Busy Detection Timer (KX-TDA100/KX-TDA200/KX-
TDA600 only)
2.9.8 [2-6-1] Numbering Plan—Main—Features—Redial
2.9.17 [2-9] System Options—Option 2
→ Redial—Automatic Redial when No Answer (ISDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ Redial—Save Dial After Connection to Redial Memory
→ Redial—Call Log by Redial key
2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 7—Outgoing Call Log Memory
2.11.10 [4-2-1] Portable Station—Extension Settings—Option 7—Outgoing Call Log Memory
PT Programming Manual
[205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
2.1 Capacity of System Resources
Operating Manual References
1.3.58 Redial, Last Number
1.4.1 Call Log, Incoming
1.15.2 Ring Tone Pattern Selection
Description
It is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,
etc.
[Ring Tone Patterns]
*: The duration of a ring tone may vary by country/area.
1 280 ms
Single
Double
Triple
S-Double