Panasonic KX-TDA600

1.3 C
36 Feature Manual
Programming References
PC Programming Manual
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→ Recall—Hold Recall
→ Recall—Disconnect after Recall
2.9.8 [2-6-1] Numbering Plan—Main—Features
→ Call Hold / Call Hold Retrieve
→ Call Hold Retrieve : Specified with a Holding Extension Number
→ Hold Retrieve : Specified with a Held CO Line Number
2.9.17 [2-9] System Options
→ Option 1—PT Operation—Automatic Hold by ICM / CO / ICD Group key
→ Option 1—PT Operation—Hold Key Mode
→ Option 5—SLT—SLT Hold Mode
PT Programming Manual
[200] Hold Recall Time
Operating Manual References
1.3.6 Call Hold
1.3.3 Call Log, Incoming
Description
When a call containing Caller ID information is received by an extension, the information is shown on the
telephone display, notifying the extension user of the caller's identity. This information is also automatically
logged in the Incoming Call Log of the extension, and can be viewed later or used to call that caller back.
Each extension and incoming call distribution (ICD) group has its own Incoming Call Log.
Call Log button
The Call Log button will alert an extension user to any missed (unanswered) calls. A flexible button can be
customized as the Call Log button, and will indicate the status of the Incoming Call Log for the extension or
corresponding ICD group, as shown below.
Light pattern Status of the corresponding call log
Red on There are call records in the log which have not been viewed.
Off There are no new call records in the log.