1.10 L
170 Feature Manual
4. Flashing Light Patterns
Conditions
• The incoming CO line call shows on the buttons in the following priority:
ICD Group→S-CO→G-CO→L-CO→PDN→INTERCOM
• The light pattern of a DSS button for incoming calls can be set to "Off" through system programming.
In this case, the DSS button light will not indicate the status of the corresponding extension.
Programming References
PC Programming Manual
2.9.17 [2-9] System Options
→ Option 1—PT Fwd / DND—Fwd LED
→ Option 1—PT Fwd / DND—DND LED
→ Option 4—DSS Key—DSS Key mode for Incoming Call
PT Programming Manual
None
Feature Manual References
1.3.2 Call Hold
1.3.16 Conference
1.6.7 FWD/DND Button, Group FWD Button
1.9.2 ICD Group Features—Group Call Distribution
1.9.3 ICD Group Features—Log-in/Log-out
1.13.12 Privacy Release
1.10.2 Line Preference—Incoming
Description
A proprietary telephone (PT) user can select the method used to answer incoming calls from the following
three line preferences.
Each of these line preferences can be assigned on each extension through personal programming
(Preferred Line Assignment—Incoming).
Slow Flashing
Moderate Flashing
Rapid Flashing
1 s
To Next Page
Loading...
