Panasonic KX-TDA600

1.6 F
106 Feature Manual
1.6.4 Flexible Numbering/Fixed Numbering
Description
To dial another extension user or to access PBX features, the access numbers (extension numbers or
feature numbers) are required.
There are three types of numbering plans:
1) Flexible Numbering (available while a dial tone is heard)
2) Flexible Numbering (available while busy, DND, or ringback tone is heard)
3) Fixed Numbering (available while dialing or talking)
1. Flexible Numbering (available while a dial tone is heard)
Extension numbers and feature numbers which are available while a dial tone is heard can be
customized for easy use. The numbers must not conflict. It is also possible to use default (Pattern 1 or
Pattern 2) shown in the following table:
a) Extension Numbers: Extension numbers consist of leading numbers and additional numbers.
Extension numbers (consisting of “0” through “9”) can be assigned as follows:
• Numbering schemes: 1-64
• Leading number: up to three digits
• Additional number: up to two digits (default: two digits)
[Example]
If the number "3" is programmed as a leading number for the 1st extension numbering scheme,
and "XX" is programmed as the additional digits, extension numbers 300 through 399 are available.
b) Feature Numbers: Up to four digits, consisting of 0-9, " ", and "#"
c) Other PBX Extension Numbers (Other PBX Extension Number [TIE] 01 through 16): Up to
three digits, consisting of 0-9, " ", and "#"
[Flexible Numbering Table (available while a dial tone is heard)]
Feature Default
Pattern 1
(with )
Pattern 2
(without )
KX-TDA50/
KX-TDA100/
KX-TDA200
KX-TDA600
Extension Numbering Scheme 1—Leading
Number
1 10 / 20 10
Extension Numbering Scheme 2—Leading
Number
2 11 / 21 11
Extension Numbering Scheme 3—Leading
Number
3 12 / 22 12