1.9 I
Feature Manual 155
3. Available Distribution Method for Public CO Lines
4. Available Destination
The following destination types can be programmed as DIL, DID, or CLI destinations.
Feature Description Details in
Calling Line Identification
(CLI) Distribution
Directs a call to its preprogrammed destination if the
caller's telephone number and its CLI destination
has been stored in the System Speed Dialing Table.
• 1.3.12 CLI
(Calling Line
Identification)
Distribution
Destination Type Availability
Wired Extension (PT/SLT/T1-OPX)
PS
ICD Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
T1
ELCOT / LCOT
GCOT
DID
TIE (E&M)
CO
LCOT
Default
Available
PRI
Port (Channel)
Type
Distribution Method
DIDDIL
CO Line
Card
To Next Page
Loading...
