Panasonic KX-TDA600

1.17 T
302 Feature Manual
2. Time Table
Each tenant has a Time Table that is used when the tenant is in Automatic Time Service Switching
mode. Each Time Table has four basic modes—day, lunch, break, and night—and also provides for
multiple "breaks", such as morning breaks and afternoon breaks, and multiple "days", such as the
morning shift and the afternoon shift following lunch.
A tenant's Time Table is programmed to control when each time mode starts (and therefore, ends) and
can be programmed separately for each day of the week.
Each Time Table has a number which corresponds to the tenant number of the tenant it serves. (Tenant
1 uses Time Table 1, etc.)
[Programming Example: Time Table]
[Visualization of Time Schedule for Tenant 1]
Time Mode
Switching
Description Condition
Automatic The current time mode will switch
automatically to another time mode at
the time programmed in the tenant's
Time Table, and can be switched
manually by pressing the Time Service
button or by dialing the Time Service
Switch feature number.
The current time mode (day/lunch/break/
night) and the switching mode
(automatic/manual) can be switched
manually by an extension assigned as a
manager, or by an extension whose
Class of Service (COS) is authorized.
Manual The current time mode will switch only
when the Time Service button is pressed
or when the Time Service Switch feature
number is dialed.
MON
TUE
Day 1
Lunch
Day 2
Break 1 start
Break 1 end
Break 2 start
Break 2 end
Night
Day 1
09:00
12:00
13:00
15:00
15:15
18:00
09:00
1234
15:00
18:30
19:00
20:30
20:45
22:30
22:45
01:00
15:00
11:00
22:00
11:00
12:00
15:00
18:00
06:00
21:00
21:15
06:15
Time Schedule
Time Table No. (Tenant No.)
Time Table No. 1
09:0006:00 12:00 15:00 18:00 21:00 00:0000:00 03:00
Night NightDay 1 Day 2 Break 1Lunch
Monday Tuesday