Panasonic KX-TDA600

1.19 V
Feature Manual 319
[Example]
VM (DTMF) Group Assignment:
The VPS is connected to the SLT ports of the PBX. These SLT ports, as well as VM (DTMF) Group
settings, must be configured to allow DTMF Integration, as shown in the following [Programming
Example of Extension Port] and [Programming Example of VM (DTMF) Group].
VM (DPT) Group Assignment:
The VPS is connected to the DPT ports of the PBX. These DPT ports, as well as VM (DPT) group
settings, must be configured to allow DPT (Digital) Integration, as shown in the following [Programming
Example of Extension Port] and [Programming Example of VM (DPT) Group].
VM (DPT) Group
A group of DPT ports which use the Voice Mail DPT (Digital)
Integration features.
With the KX-TDA50:
• One VM (DPT) group can be assigned.
• A maximum of 4 ports (8 channels) of the VPS can form a
group.
With the KX-TDA100/KX-TDA200/KX-TDA600:
• A maximum of 2 (for KX-TDA100/200) or 8 (for KX-TDA600)
KX-TVS/KX-TVP systems can be connected to the PBX.
• A maximum of one VM (DPT) group per KX-TVS/KX-TVP
can be assigned.
• A maximum of 12 ports (24 channels) of the VPS can form
each group.
Type Description
PBX
DPT
Port
VPS
(DPT [Digital] Integration)
DPT
Port
DPT
Port
DPT
Port
DPT
Port
VM (DPT) Group
Floating extn. no. 500 (default)
Extn.101 Extn.102 Extn.103 Extn.104
SLT
Port
SLT
Port
SLT
Port
SLT
Port
VPS
(DTMF Integration)
VM (DTMF) Group
Floating extn. no. 200
Extn.201 Extn.202 Extn.203 Extn.204
SLT
Port