Panasonic KX-TDA600

1.3 C
Feature Manual 41
• Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically.
Any flexible button can be customized as the Call Park (Automatic Park Zone) button.
• Call Park Retrieve Deny
Internal Call Block (→ 1.9.14 Internal Call Block) also determines which extensions' calls an extension
user can retrieve from a parking zone, i.e., if extension 101 cannot call extension 201, then it cannot
retrieve extension 201's parked calls either.
Programming References
PC Programming Manual
2.9.4 [2-3] Timers & Counters
→ Recall—Call Park Recall
→ Recall—Disconnect after Recall
2.9.8 [2-6-1] Numbering Plan—Main—Features—Call Park / Call Park Retrieve
2.11.5 [4-1-4] Wired Extension—Flexible Button
→ Ty p e
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
2.11.13 [4-2-3] Portable Station—Flexible Button
→ Ty p e
→ Parameter Selection (for Call Park)
→ Optional Parameter (or Ringing Tone Type Number) (for Call Park)
2.11.17 [4-3] DSS Console
→ Ty p e
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
PT Programming Manual
None
Feature Manual References
1.6.3 Flexible Buttons
2.1 Capacity of System Resources
Operating Manual References
1.3.6 Call Hold
Light pattern Status
Slow red flashing A call is parked in the preset parking zone
Off There are no parked calls