Panasonic KX-TDA600

1.3 C
Feature Manual 45
• One-touch Transfer
One-touch Transfer can be performed by pressing a One-touch Dialing button that has been assigned
the TRANSFER command and the telephone number of the transfer destination. This is useful for
transferring calls to an outside destination. (→ 1.11.2 MEMORY DIALING FEATURES)
• Automatic Transfer by SDN Button or DSS Button
Pressing an SDN button or DSS button during a conversation with an extension or outside party can
automatically transfer the call to the specified destination (→ 1.13.7 PDN (Primary Directory Number)/
SDN (Secondary Directory Number) Extension). It is possible through system programming to prevent
this feature from operating for extension to extension calls.
Programming References
PC Programming Manual
2.9.3 [2-2] Operator & BGM—BGM and Music on Hold—Sound on Transfer
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Recall—Transfer Recall
2.9.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Transfer to CO
2.9.17 [2-9] System Options—Option 4
→ DSS Key—Automatic Transfer for Extension Call
→ Transfer—Transfer to busy Extension without BSS Operation
2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Transfer Recall Destination
2.11.10 [4-2-1] Portable Station—Extension Settings—Option 1—Transfer Recall Destination
PT Programming Manual
[201] Transfer Recall Time
[503] Call Transfer to CO Line
[712] Music for Transfer
Feature Manual References
1.3.19 COS (Class of Service)
Operating Manual References
1.3.11 Call Transfer
1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Trunk Group Access no. + Trunk Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
Destination Availability