EasyManua.ls Logo

Panasonic KX-TDA600

Panasonic KX-TDA600
366 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.4 D
70 Feature Manual
[Programming Example: DID Table]
In this example:
If the DID number is "123-4567":
1) The PBX looks for the DID number in the table and finds it in location 1.
2) The PBX checks the time mode.
In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI
destination, if assigned. If not assigned, the call is routed to the DID destination, extension 105,
and "Sales" is displayed.
In lunch mode: CLI distribution is disabled. The call is routed to the DID destination, extension 100,
and "Sales" is displayed.
Note
Tenant numbers and VM trunk group numbers (not shown here) can also be programmed in the DID
Table.
The tenant number programmed here is used only to determine the Time Table used by each DID
number; selecting tenant 3 means the DID number will use Time Table 3, for example. The VM trunk
group number set here is used to determine the Incoming Call Service and greeting message used by
the Voice Processing System (VPS) during the current time mode. (→ 1.19.4 Voice Mail DPT (Digital)
Integration).
Conditions
• To use this feature, DID must be assigned as the distribution method for the desired CO line port.
Programming References
PC Programming Manual
2.9.4 [2-3] Timers & Counters—Miscellaneous—Incoming Call Inter-digit Timer—DID (KX-TDA100/KX-
TDA200/KX-TDA600 only)
2.17.2 [10-2] DIL Table & Port Settings—DID/TIE
→ Distribution Method (KX-TDA100/KX-TDA200/KX-TDA600 only)
→ DID/TIE—Remove Digit
*1
:
→ 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Number
→ [451] DID Number (KX-TDA100/KX-TDA200/KX-TDA600 only)
*2
:
→ 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Name
→ [452] DID Name (KX-TDA100/KX-TDA200/KX-TDA600 only)
*3
:
→ 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—CLI Ring for DID—Day, Lunch,
Break, Night
*4
:
→ 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Destination—Day, Lunch,
Break, Night
→ [453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only)
Location
1
2
DID
Name
*2
Sales
Judy
DID No.
*1
123-4567
123-2468
Day
Enable
Enable
Lunch
Disable
Disable
Night
Disable
Disable
Break
Enable
Disable
Day
105
102
Lunch
100
100
Break
105
102
CLI Distribution
*3
DID Destination
*4
Night
100
100

Table of Contents

Other manuals for Panasonic KX-TDA600

Related product manuals