Panasonic KX-TDA600

1.4 D
84 Feature Manual
Conditions
• Multilingual Display
Each extension can select its display language through personal programming (Display Language
Selection).
• Display Contrast
The display contrast can be adjusted through personal programming (Display Contrast Selection). This
is available only for DPTs and IP-PTs.
• Display Backlight
Some extensions can select whether to turn the display backlight on or off through personal
programming (Display Backlight Selection). For details, refer to the manual for your telephone.
• Characters (name) or digits (number) exceeding the display's limitations are not displayed. Although in
this case information may not be displayed properly, the received information is not altered.
Programming References
PC Programming Manual
2.9.17 [2-9] System Options—Option 5—PT Feature Access—No. 1–8
2.11.1 [4-1-1] Wired Extension—Extension Settings
→ Option 5—Display Language
→ Option 5—Incoming Call Display
→ Option 5—Automatic LCD Switch when Start Talking
2.11.10 [4-2-1] Portable Station—Extension Settings
→ Option 5—Display Language
→ Option 5—Incoming Call Display
→ Option 5—Automatic LCD Switch when Start Talking
2.17.1 [10-1] CO Line Settings—CO Name
PT Programming Manual
None
The number and name of the optional device D02: 1st Door –
The telephone number dialed 1234567890 –
The received call information
a) Caller's name
b) Caller's number
c) CO line number/name
d) Original Destination, if the call is forwarded
e) DID name
*
ABC Company
12345678
Line 001: Sales
→102:Mike
Panasonic
*
The first line message can
be either (a), (c), or (e) at
each extension through
system programming.
Duration of the current CO line call Line 001 11:02'28 –
*
Only available for KX-TDA100, KX-TDA200, and KX-TDA600.
Display Item Display Example Condition