Value Range
• G722
• PCMA (G.711 A-law)
• G726-32 (G.726 [32k])
• G729A
• PCMU (G.711 µ-law)
Note
• You can select each codec on once within [CODEC Settings].
• A maximum of 5 priorities can be assigned. If only 4 codecs are
specified in a configuration file, you will be able to select from
only 4 codecs, and [Fifth CODEC] will be disabled.
• The codec selections that are displayed may vary depending
on the unit or the operating environment.
Default Value G726-32
Configuration File Reference SDP_CODEC[0–4]_[1–8] (Page 169)
Fourth CODEC
Description Selects the codec to assign the 4th highest priority to.
Value Range
• G722
• PCMA (G.711 A-law)
• G726-32 (G.726 [32k])
• G729A
• PCMU (G.711 µ-law)
Note
• You can select each codec on once within [CODEC Settings].
• A maximum of 5 priorities can be assigned. If only 4 codecs are
specified in a configuration file, you will be able to select from
only 4 codecs, and [Fifth CODEC] will be disabled.
• The codec selections that are displayed may vary depending
on the unit or the operating environment.
Default Value G729A
Configuration File Reference SDP_CODEC[0–4]_[1–8] (Page 169)
Fifth CODEC
Description Selects the codec to assign the lowest priority to.
100 Administrator Guide Document Version 2010-08
3.6.4 VoIP Settings [Line 1]–[Line 8]
To Next Page
Loading...
