Value Range
• Y (Enable privacy mode)
• N (Disable privacy mode)
Note
• If set to "Y", the conversation cannot be interrupted by another
handset or base unit.
• If set to "N", the conversation can be interrupted by another
handset or base unit.
Default Value
Y
Web User Interface Reference Enable Privacy Mode (Page 107)
4.7.2 SIP Settings
SIP_USER_AGENT
Value Format String
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 40 characters
Note
• An empty string is not allowed.
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Web User Interface Reference SIP User Agent (Page 84)
SIP_AUTHID_[1–8]
Parameter Name Example SIP_AUTHID_1, SIP_AUTHID_2, …, SIP_AUTHID_8
Value Format String
Description Specifies the authentication ID required to access the SIP server.
Value Range Max. 64 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
Web User Interface Reference Authentication ID (Page 88)
180 Administrator Guide Document Version 2010-08
4.7.2 SIP Settings
To Next Page
Loading...
