Panasonic KX-TGP500B04 - Tone Timings; Howler Tone; Tone Frequencies; Start Time

Tone Timings
Description Specifies the pattern, in milliseconds, of reorder tones using 8 whole
numbers (on 1, off 1, on 2, off 2, on 3, off 3, on 4, off 4) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Default Value 250,250,250,250,250,250,250,250
Configuration File Reference REORDER_TONE_TIMING (Page 167)
3.7.4.6 Howler Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of howler tones (i.e., alarm
tones) using 2 whole numbers separated by a comma.
Value Range 0, 200–3000 (0: No tone)
Default Value 1400,2060
Configuration File Reference HOWLER_TONE_FRQ (Page 167)
Tone Timings
Description Specifies the pattern, in milliseconds, of howler tones (i.e., alarm tones)
using 4 whole numbers (on 1, off 1, on 2, off 2) separated by commas.
Value Range 0–5000 (0: Infinite time)
Default Value 100,100,100,100
Configuration File Reference HOWLER_TONE_TIMING (Page 167)
Start Time
Description Specifies the length of time, in seconds, that busy or reorder tones play
until they switch to howler tones.
Value Range 0–120 (0: Disable)
Default Value 30
Configuration File Reference HOWLER_START_TIME (Page 168)
3.7.5 Import Phonebook
This screen allows you to import phonebook data from a PC to the specified unit. For details, see 5.2.1 Import/
Export Operation.
118 Administrator Guide Document Version 2010-08
3.7.5 Import Phonebook