Panasonic KX-TGP500B04 - Sdp_Ckrte[0-4]_[1-8]; Sdp_Param[0-4]_[1-8]; Sdp_Ptype[0-4]_[1-8]

Web User Interface Reference
• First CODEC (Page 98)
• Second CODEC (Page 99)
• Third CODEC (Page 99)
• Fourth CODEC (Page 100)
• Fifth CODEC (Page 100)
SDP_CKRTE[0–4]_[1–8]
Parameter Name Example SDP_CKRTE0_1, SDP_CKRTE0_2, …, SDP_CKRTE0_8,
SDP_CKRTE1_1, SDP_CKRTE1_2, …, SDP_CKRTE1_8, …,
SDP_CKRTE4_1, SDP_CKRTE4_2, …, SDP_CKRTE4_8
Value Format Integer
Description Specifies the sampling rate with "SDP_CKRTEx_y" for the
corresponding encoding name specified by "SDP_CODECx_y" (x:
priority, y: line number).
Value Range 0, 8000, or 16000 (0: Unused SDP, 8000 or 16000: Available SDPs)
Note
• The value "16000" is valid only for the G722 codec.
Default Value 8000
SDP_PARAM[0–4]_[1–8]
Parameter Name Example SDP_PARAM0_1, SDP_PARAM0_2, …, SDP_PARAM0_8,
SDP_PARAM1_1, SDP_PARAM1_2, …, SDP_PARAM1_8, …,
SDP_PARAM4_1, SDP_PARAM4_2, …, SDP_PARAM4_8
Value Format Integer
Description Specifies the number of audio channels with "SDP_PARAMx_y" for the
corresponding encoding name specified by "SDP_CODECx_y" (x:
priority, y: line number).
Note
• For the current version, only the value "0" is supported.
Value Range 0, 1–255 (0: No parameter specification, 1–255: Audio channels)
Default Value 0
SDP_PTYPE[0–4]_[1–8]
Parameter Name Example SDP_PTYPE0_1, SDP_PTYPE0_2, …, SDP_PTYPE0_8,
SDP_PTYPE1_1, SDP_PTYPE1_2, …, SDP_PTYPE1_8, …,
SDP_PTYPE4_1, SDP_PTYPE4_2, …, SDP_PTYPE4_8
Value Format Integer
170 Administrator Guide Document Version 2010-08
4.6.1 Codec Settings