Panasonic KX-TGP500B04 - SIP Setting; SIP User Agent; Transport Protocol for SIP; Transport Protocol

3.6.1.1 SIP Setting
SIP User Agent
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 40 characters
Note
• You cannot leave this field empty.
• If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower-case.
• If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference SIP_USER_AGENT (Page 180)
3.6.1.2 Transport Protocol for SIP
Transport Protocol
Description Selects which transport layer protocol to use for sending SIP packets.
Note
• If you change this setting, the unit will restart automatically once
the message "Complete" appears. If the unit is on a call, it will
restart after it returns to idle.
Value Range
• UDP
• TCP
Default Value UDP
Configuration File Reference SIP_TRANSPORT_[1–8] (Page 195)
84 Administrator Guide Document Version 2010-08
3.6.1 SIP Settings