Value Range 0–255
Note
• Because the 6-bit DSCP values (i.e., "xxx 000" where "x"="0"
or "1") in the DS field are converted to the 8-bit DSCP values
(i.e., "xxx 000 00"), you must specify here the fourfold decimal
value for 2 bits shifted left. The following listing shows the DSCP
level of DiffServ and the corresponding decimal value to be
specified in this parameter.
– Best Effort (default) (000 000 00): 0
– AF11 (DSCP 10) (001 010 00): 40
– AF12 (DSCP 12) (001 100 00): 48
– AF13 (DSCP 14) (001 110 00): 56
– AF21 (DSCP 18) (010 010 00): 72
– AF22 (DSCP 20) (010 100 00): 80
– AF23 (DSCP 22) (010 110 00): 88
– AF31 (DSCP 26) (011 010 00): 104
– AF32 (DSCP 28) (011 100 00): 112
– AF33 (DSCP 30) (011 110 00): 120
– AF41 (DSCP 34) (100 010 00): 136
– AF42 (DSCP 36) (100 100 00): 144
– AF43 (DSCP 38) (100 110 00): 152
– CS1 (ToS 1) (001 000 00): 32
– CS2 (ToS 2) (010 000 00): 64
– CS3 (ToS 3) (011 000 00): 96
– CS4 (ToS 4) (100 000 00): 128
– CS5 (ToS 5) (101 000 00): 160
– CS6 (ToS 6) (110 000 00): 192
– CS7 (ToS 7) (111 000 00): 224
– EF (Expedited Forwarding) (DSCP 46) (101 110 00): 184
Default Value 0
Web User Interface Reference SIP Packet QoS (DSCP) (Page 91)
SIP_2NDPROXY_ADDR_[1–8]
Parameter Name Example SIP_2NDPROXY_ADDR_1, SIP_2NDPROXY_ADDR_2, …,
SIP_2NDPROXY_ADDR_8
Value Format String
Description Specifies the IP address of the secondary SIP proxy server.
Note
• This setting is available only when "SIP_PRXY_ADDR_[1–
8]" is specified in IP address notation.
Value Range IP address in dotted-decimal notation
Default Value Empty string
Document Version 2010-08 Administrator Guide 185
4.7.2 SIP Settings
To Next Page
Loading...
