File Name
Description Specifies the path of the firmware file to be imported.
Value Range No limitation
Note
• There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths may cause longer data transfer times and result in
an internal error.
Default Value Not stored.
3.8.3 Provisioning Maintenance
This screen allows you to change the provisioning setup to download the configuration files from the
provisioning server of your phone system.
Note
• Each unit can accept up to 3 configuration files. For details about provisioning, see
1.1.6 Provisioning.
3.8.3.1 Provisioning Maintenance
Enable Provisioning
Description Selects whether the unit is automatically configured by downloading the
configuration files from the provisioning server of your phone system.
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference PROVISION_ENABLE (Page 146)
Document Version 2010-08 Administrator Guide 123
3.8.3 Provisioning Maintenance
To Next Page
Loading...
